background image

 

S

ERVICE 

R

ELIABILITY

 

 

 

 4 / 31 

Multi-Source Function System 7001RC - V02.01 

hopf

 

Elektronik GmbH 

Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

 

 

 

Safety regulations 

  
The safety regulations and technical data serve to ensure trouble-free 
operation of the devices and protection of persons and equipment. It is 
therefore of utmost importance to observe and comply with these 
regulations. If these are not complied with, then no claims may be made 
under the terms of the warranty and no liability will be assumed for any 
ensuing damage. 
 

 

 

 

Safety of the device 

  
This device has been manufactured in accordance with the latest 
technological standards and approved safety regulations  

The device should only be put into operation by trained and qualified staff. 
Care must be taken that all cable connections are laid and fixed in position 
correctly. The device should only be operated with the voltage supply 
indicated on the identification label.  

The device should only be operated by qualified staff or employees who 
have received specific instruction.   

If a device must be opened for repair, this should only be carried out by 
employees with appropriate qualifications or by 

hopf 

Elektronik GmbH.  

Before a device is opened or a fuse is changed all power supplies must be 
disconnected. 

If there are reasons to believe that the operational safety can no longer be 
guaranteed the device must be taken out of service and labelled 
accordingly. The safety may be impaired when the device does not operate 
properly or if it is obviously damaged. Contact your local 

hopf 

Elektronik GmbH representative for required action. 

 

 

 

CE-Konformität 

 

This device fulfils the requirements of the EU directive 89/336/EWG 
"Electromagnetic  compatibility" and 73/23/EWG "Low voltage 
equipment". 

Therefore the device bears the CE identification marking 
(CE=Communauté Européenne) 

 

CE = Communautes Europeénnes = European communities 

 

The CE indicates to the controlling bodies that the product complies with the requirements of 
the EU directive - especially with regard to protection of health and safety for the operator 
and the user - and may be released for sale within the common markets. 

 

Содержание 7001RC
































Отзывы: