HS100-1900A150P
13
Poor cleaning effect
The brush height is unreasonable or the
brush wear leads to insufficient contact
between the brush and the ground
Reduce brush limit bolt height; replace the
brush if it is too badly worn
Twisting or deformation of brush
remove winding; replace the corresponding
brush if the hair is badly deformed
Driving too fast in cleaning
Please reduce the speed of the sweep
Large garbage after
cleaning (leaves, small
paper tray lamps)
The main brush front block pedal is not
stepped on while the larger garbage is
being cleaned; the main brush front block
pedal is not working properly
Correct operation according to specifications;
repair of the main brush front bezel linkage
device
Dust residues after
cleaning are obvious
Filter Jam or Damage
Cleaning filters; replacing filters if they are
damaged
Damage to the Main Brush Bezel
Replace the Damaged Bezel
The brush wear too fast
The work position of the brush is too low
Raise the height of brush limit bolts
The ground is too rough
Do not sprinkle water while
cleaning
Insufficient water in the water tank
Add water to the tank
Water pump damage
Replace the water pump
Can't charge
Charging socket is abnormal
Replace charging socket
Charging cable is damaged
Replace charging cable
Charger is damaged
Replace charger
Battery is damaged
Replace battery
Battery discharges too
fast
Battery is aging or damaged
Replace battery
The fuse blows
frequently
Fuse quality problem
Replace the fuse brand
There is a short circuit in the sweeper
Check the circuit