HS100-1900B150P
9
Caution:
(1) If any part is opened/disassembled during inspection, it must be restored to its original
condition after inspection to ensure accuracy and reliability.
(2) It is forbidden to directly wash the interior of the sweeper with water, especially the
electrical system.
(3) It is forbidden to touch moving parts (such as wheels, side brushes, etc.) when the
sweeper is running. If you need to check, please turn off the sweeper and remove the
key.
3.2 Operation Method
Insert the key and turn the key switch to start the sweeper.
After pressing the forward/backward button, lightly step on the accelerator pedal to move the
sweeper forward/backward.
Adjust the stepping depth of the accelerator pedal to control the speed of the sweeper, turn the
steering wheel to control the direction of the sweeper, and step on the brake pedal to brake the
sweeper.
Rotate the lever (combination switch) behind the steering wheel to control the light switch;
move the control lever up to turn on the right turn signal, move it down to turn on the left turn
signal; and press the button on the top of the lever to sound the horn.
Press the sweeping switch to turn on the sweeping system. The sweeping system of this
sweeper is fully automatic with one-button control, and the user only needs to concentrate on
controlling the driving of the sweeper after turning on the sweeping system, without distracting
to control the sweeping system.
When you need to clean the larger garbage on the road (3mm
＜
height
＜
60mm), step on the
main brush front baffle pedal when the garbage comes under the vehicle, and then release the
pedal after the sweeper passes the location of the garbage.
Caution: Do not clean slender rope-like objects such as ropes and metal wires, so as not
to be entangled with the brush and affect normal operation.
Do not clean un-extinguished or high-temperature objects, as well as toxic and harmful
objects, so as not to burn the brush and ignite/contaminate other garbage.
When you need to stop the sweeper in an emergency, you can directly press the emergency
stop switch on the left side of the control panel, and the sweeper will stop immediately.
When parking the sweeper, park the sweeper on a flat ground, make sure that the
forward/backward switch and the sweeping switch are in the stop position, and then remove the
key.
The method of cleaning up the garbage hopper is as follows:
(1) After holding the handle of the garbage hopper (
①
in the figure below), open the lock of
the garbage hopper (
②
in the figure below), and then gently place the back of the garbage
hopper on the ground.
