\USEBOOK\C\07\1A\6\1A-6_ENG.DOC PAGE:
5
/6
4-2-6. Mounting direction
：
After pressing
“
DIR ADJ
”
key, change over CW/CCW by pressing
〝▲
▼〞
keys.
After pressing
〝
ENTER
〞
,the data is confirmed and
this display will be changed over
back to the main page. As below:
4-2-7. Origin Setting
：
When pressing
”
ORG ADJ
”
key,
Select YES/NO by pressing
〝▲
▼〞
keys to confirm that the angle is the origin.
▲
▼
Select
‘
YES
’
and pressing
“
ENTER
”
key, than this display will be changed over back to the
main page.
Select
‘
NO
’
and pressing
“
ENTER
”
key, than select YES/NO by pressing
〝▲
▼〞
keys to
confirm that the angle is the origin again.
▲
▼
Select
‘
NO
’
, than this display will be changed over back to the main page.
Select
‘
YES
’
, than
“
ORG
”
is blinking.
After input the origin value by
“
▲
▼
”
keys, pressing
“
ENTER
”
key to save and change
over back to the main page.
4-3. Encoder Abnormality
When the encoder is abnormal, all outputs are OFF. As below:
I N S T A L L _ D I R : C W
I N S T A L L _ D I R : C C W
O R G C O N F I R M : Y E S
A B S O R G : X X X
O R G C O N F I R M : N O
A B S O R G : X X X
O R G C O N F I R M : Y E S
H O M E O R G : X X X
O R G C O N F I R M : N O
H O M E O R G : X X X
O R G C O N F I R M : N O
H O M E O R G : X X X
Clockwise
Anti-clockwise
T
he area is blinked, until to
press
“
ENTER
”
key.
