\USEBOOK\C\07\1A\6\1A-6_ENG.DOC PAGE:
2
/6
3.
PARAMETER SETTING
：
3-1.
Start and end setting value of angle 1
～
9.
3-2.
Run-control enable/disable of angle 1
～
8
,(Angle 9 is fixed output).
3-3.
Reset origin setting.
3-4.
Setting mounting direction of encoder.
4.
OPERATION DESCRIPTION
：
4-1.
Main Page
：
ANGLE
：
Display angle.
OUT
：
Display output status of 9 forms.
4-2.
Parameter Setting
：
he following settings mode, must first press the "
▲
▼
" key, and then turn
on the power, can be set
。
4-2-1.
Go to Parameter setting mode
：
After pressing
〝▲
▼〞
keys,
press the POWER.
After this display on screen will blink three times, the main page is entered. As below:
4-2-2.
Start and end angle 1
～
8 & Run-control enable/disable of angle 1
～
8.
(P.S.
Angle 9 is fixed output, don
’
t select
Run-control enable/disable)
When pressing
“
DISPLAY
”
, first angle value displays.
The setting way refers to 4-2-3, 4-2-4 and 4-2-5.
Pressing
〝▲
▼〞
keys will be changed over angle 1
～
9 in turn.
A N G L E
：
X X X °
O U T
：
1 2 3 4 5 6 7 8 9
P A S S W O R D O N
A N G L E
：
X X X °
O U T
：
1 2 3 4 5 6 7 8 9
N 0 1 _ S T A R T : X X X °
X E N D : X X X °
