14
Installation using pedestal mounting option
(Continued from previous page)
3.
Free the pedestal top plate from the assembly by removing the retaining screw, yoke
locking nut, stainless steel washer and 4 ¼-20 screws.
4.
Position and support the monitor and yoke assembly so that cables exiting from the
monitor can be easily routed into the top of the pedestal.
5.
Install the monitor power supply in the pedestal as shown using the hook and loop
fastening material provided.
6.
Install the pedestal top plate and polyethylene friction plate using the four ¼-20
screws insuring all cabling inside the pedestal has been fed through the top of the
pedestal top plate.
7.
Connect all communication and power cables to the monitor insuring all remaining
hardware has been threaded onto the cables in their proper order per the illustration
above.
Connectors that do not have a locking mechanism should be sheathed in heat
shrink tubing to insure that they do not come loose inside the pedestal.
8.
Install the monitor and yoke assembly onto the top of the pedestal with the stainless
steel washer, the yoke locking nut and the retaining screw.
Insure that there is a
sealing washer underneath the retaining screw.
9.
Feed all connectors and excess cabling inside the top of the pedestal.
10.
Screw conduit elbow onto top of pedestal taking care to position the direction of the
conduit to allow free tilting of the monitor without interference.