10
Installation using VESA mounting
1.
All units come standard with a 100mm square VESA mounting pattern with M4
threads. If this mounting method is used, consider the following:
M4 screws should not protrude into the rear cover by more than ½”.
The capacity of the arm or mounting plate selected should take into account
the total weight of the monitor and its center of gravity.
For NEMA 4/4X applications, the mounting interface should be properly
sealed to prevent egress of water.
VESA Mounting Holes
(Note: NEMA 2 unit
has both 75mm and
100mm hole patterns.)