16.
Maintenance
(continued)
1. Using a flat-head screwdriver or coin, turn the locking tab to the unlock
position. The locking tab can now be removed to access the roller
brush.
2. Gently remove the roller brush as shown, and clean as required.
WARNING! Always switch off the cleaner before performing any maintenance on the
powerhead.
Cleaning the Roller Brush
1. Align the two pins to the socket and fully click the canister into the
handvac assembly.
NOTE: Failure to do so may cause damage to the cleaner.
Reinstalling the Canister to the Handvac
