background image

Automatic Features

KG Mode (Half Load)

Available on the Cottons and Synthetics cycles, the intelligent sensor adjusts the water

level and programme length throughout each phase of the cycle according to how

much laundry you load into the machine. The KG Mode indicator will light up when

the intelligent sensor is weighing the laundry.
The washing machine is fitted with a self-adjusting water level system. This system 

enables the machine to use the optimum amount of water needed to wash and rinse

the laundry in relation to the particular load. This results in a reduction of the water

and electricity used without in any way compromising the washing and rinsing 

performance. The amount of water and electricity used will always be appropriate for

the clothes load size. 
The washing machine automatically ensures excellent washing results at minimum cost

whilst respecting the environment.

Out of Balance protection

This model is fitted with an electronic sensor device that checks if the load is balanced

correctly. If the load is slightly unbalanced the machine will re-balance it automatically

and then carry out the normal spin. If, after several attempts, balance is not restored a

reduced spin speed will be used. If loads are seriously unbalanced the spin stage will

be cancelled. This helps limit vibration, reduce noise and improve the washing 

machine's reliability and life.

8 Pulse Technology

This washing machine is equipped with an innovative system that by means of 8 high

pressure jets, sprays a mixture of water and detergent directly into the load.

The “inverter motor” technology used in this machine manages the drum movement

during the start up of each programme, in conjunction with the 8 high pressure jets

spraying the detergent mixture into the load, the cycle includes a set of spin actions

that helps the detergent solution to penetrate into the fibers, helping dirt removal  and

ensuring the best available wash performance.

The spin cycle at the beginning of the wash is therefore a normal phase of the

program and should not be regarded as a malfunction of the machine. 

The 8 pulse system is also used during the rinse phase where the high pressure jets aid

the complete removal of detergent residues trapped in the clothes.

21

Содержание VHD 10









































Отзывы: