5
Continued
➜
1. Handle
2. Cord hooks:
wrap cord
around hooks for storage.
The top hook rotates right
or left for easy cord
release.
3. Hose
4. ON/OFF switch:
located
on left rear corner of
cleaner body
5. Carrying handle
6. Stair cleaning handle:
located on lower edge of
dirt cup.
7. Handle release lever:
step
on lever to lower handle to
operating or low positions.
8. Headlight
9. Nozzle control knob:
slide
knob to correct setting for
height of carpet being
cleaned.
10. Furniture guard:
helps
prevent cleaner from
marking furniture.
11. Wands
12. Final filter exhaust
13. Dusting brush
14. Crevice tool
15. Furniture nozzle
16. Long crevice wand:
stores inside wand
17. Hose hook
18. Dirt cup latch
19. Dirt cup lid
20. Dirt cup
21. Dirt cup handle
22. Main filter
(inside
cup)
23. Pre-filter assembly
(inside cup)
Cleaner description
A
2. How to use
Operate cleaner only at
voltage specified on data
plate on bottom of
cleaner.
This cleaner is intended
for household use.
Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
ON-OFF switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch (A) toward
front of cleaner.
To turn cleaner OFF, push toward back of
cleaner.
2-2
2-1
1
2
2
13
5
8
11
18
19
14
12
10
9
6
7
22
20
21
15
4
23
3
17
16
Handle positions
The handle of your cleaner has three
positions;
upright
for storage and when
using cleaning tools;
operating posi-
tion
for general operation on carpet
and floors;
low
for reaching under low
furniture. Step on handle release lever
to lower handle.
2-3
