Instructions for Use
(continued)
Correct Use
Incorrect Use
Using The Clean Control™ Dial
(When using with Hoover® SteamPlus™ Cleaning Solution)
1. The Clean Control™ Dial controls the amount of cleaning solution that is added to the steam.
2. It does not adjust the amount of steam, only the cleaning solution.
3. If you wish to clean with steam alone, simply turn the Clean Control™ Dial to “OFF”. Now every time
you press the steam trigger, you will release steam alone.
4. If you wish to clean using Hoover® SteamPlus™ Cleaning Solution, simply turn the Clean Control™
Dial to the desired setting. Now when pressing the steam trigger, the steam cleaner will release the
amount of solution that is indicated on the Clean Control™ Dial as well as steam.
Operating Steam Cleaner
1. Press the power button. The blue power indicator light should stay illuminated.
If the light does not illuminate, check the “Troubleshooting” section for more details.
2. The steam cleaner should take between 3-5 minutes to heat up to steam
temperatures, which will be indicated when the green steam ready indicator
light illuminates.
3. When operating the steam cleaner, make sure to keep it level during use.
Tilting the cleaner downward too far will cause water to be emitted from
the cleaner.
WARNING: Do not operate steam cleaner without water
in water tank.
