Storage
1. After the steam cleaner is used, press the power button to turn the power “OFF” and then unplug
the power cable from the wall outlet.
2. Press down the steam trigger to release all pressure.
3. Wait 7-10 minutes until the safety pressure indicator has gone down, which indicates the steam
cleaner has cooled. After 10 minutes, if the safety pressure indicator has not fully dropped, release
residual pressure by pressing steam trigger. Slowly start to unscrew the water fill safety cap counter-
clockwise while gently pushing on the safety pressure indicator.
DO NOT FULLY UNSCREW THE
WATER FILL SAFETY CAP AT THIS TIME.
Allow machine to cool an additional 5 minutes. After you
have ensured the steam cleaner has cooled and pressure has been released, the water fill safety cap
should turn freely for removal. Unscrew the cap completely.
4. Empty the residual water in the tank and clean the external surface with a dry cloth. Allow to dry.
Re-install the water fill safety cap in a clockwise direction and tighten until completely sealed.
5.
DO NOT OVERTIGHTEN SAFETY CAP.
6. Leaving unused solution in solution tank will not affect performance.
7. Store upright in a protected, dry area. Keep water funnel and measuring cup for future use.
