1-29
2-1
Slide crevice tool (Y) onto projection.
Snap into place.
Remove rectangular foam retainer (Z), if
present, (part of protective packing
material) located under the handle
release lever. Discard foam retainer.
Z
Y
CAUTION: When cleaner is turned on,
the agitator brush roll will continue to
rotate while cleaner handle is in
upright position. Avoid tipping clean-
er or setting it on furniture, fringed
area rugs or carpeted stairs during
tool use.
Fill out and return the product registra-
tion card included with your cleaner.
The assembled cleaner will look like the
drawing below.
2. How to use
r
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2
16
17
2
18
19
4
15
Cleaner description
1. Handle
2. Cord hooks
: wrap cord around hooks for
storage. The top hook can be rotated right or left
for easy cord release.
3. Bag door latch
4. ON/OFF switch
: located on side of handle.
5. Bag door
6. Stair cleaning handle
: located on lower edge
of bag.
7. Handle release lever
: step on lever to lower
handle to operating or low position.
8. Cleaner body
9. Nozzle control knob
: slide knob to correct
setting for height of carpet being cleaned.
10. Headlight
(some models only)
11. Furniture guard
: helps
prevent cleaner from marking furniture.
12. Hose door
: open door to connect hose to
cleaner.
13. Hood
14. Hose
15. Tool rack
16. Dusting brush
17. Wand
18. Furniture nozzle
19. Crevice tool
Operate cleaner only at voltage specified on
bottom plate on bottom of cleaner.
7
