Maintenance
(continued)
Cleaning the Vacuum Inlet Lid
1. turn off the power switch; turn the cleaner upside down on
flat surface.
2. Remove the vacuum inlet lid out as per following drawing.
3. Clean the vacuum inlet lid and the fan-shaped mechanism
to ensure good ventilation.
4. Guide the hinge tabs on the vacuum inlet lid back into their
holes carefully.
CAUTION! Please open the vacuum cover as shown:
1. Pressing the board as No.1;
2. Pushing the buckle slightly as No.2;
3. Rotate it up as No.3.
3
2
1
Replacing the Side Brush
the side brush is a consumable and will wear out over time.
1. Screw out the two screws.
2. turn the side brush to the extent
that the screwdriver can be inserted,
loosen the screen, take off the old
brush and replace with a new one.
3. Install the side brush and bottom
housing in adverse order.
