Maint
enanc
e
Cleaning the Main Brushes of the Cleaner
1. turn off the power switch and put the cleaner on a flat surface upside down.
2. Using right thumb, push forward the locking rod and lift up the cover; using left
hand, hold the middle hairbrush and lift up.
3. Clean the chamber where the brush is located and the contaminants on the brushes.
4. Wipe out dirt on the metal shaft and
bearing of the brush coupler and the
brushes (this may not be necessary to
do after every use). If necessary, you may
add a little lubricant to it.
5. Put the brush coupler and brushes back
and tighten the screw.
