IMPORTANT: When using on carpets, always make sure the velcro microfibre cleaning pad is used and covers the floor head
entirely before using the carpet glider. Only use the carpet glider when refreshing carpets and turn the detergent dial to OFF.
Refreshing carpets
Using accessories
OPERATION
7
To produce steam squeeze
the trigger. To prevent
overly wetting the carpet,
avoid holding the trigger
continuously
Move the steam mop
slowly backwards and
forwards across the carpet
paying particular attention
to high traffic areas
To release the carpet
glider, place foot on
clip and push down.
Lift steam mop to
unhook and remove
To recline the steam
mop place foot on floor
head and pull handle
backwards
Place foot on outer
floor head and gently pull
away steam mop to release
the compact scrub brush
Move steam mop back and
forwards across the floor,
getting into corners and
awkward places
Turn the detergent dial
to OFF when refreshing
carpets
Place the microfibre pad
on the floor white side
facing up. Place steam
mop onto pad making
sure the entire pad
covers the floor head
With microfibre pad
attached, hook the steam
mop into the front of the
carpet glider and push to
clip into place. Carpet glider
should only be used when
refreshing carpets
Push On/Off button
to switch on
IMPORTANT: Always switch off the steam mop before
attaching or removing the floor head.
