If you have a problem
This appliance was inspected thoroughly and was in good operating condition
when it was shipped from the factory. If a minor problem occurs it usually can
be solved quite easily when the cause is found. Therefore, this check list is
provided for your convenience.
Problem Possible cause
Possible solution
1. Not firmly plugged in.
1. Plug unit in firmly.
poo-Pol-
2. No voltage in wall plug.
2. Check fuse or breaker.
3. Blown fuse/tripped
3. Replace fuse/ reset
won’t run
breaker.
breaker.
1. Tank valve clogged.
1. Unscrew cap on bottom
poo-Pol-
of tank and rinse cap
with water to clear
won’t
obstruction.
pense
solution
1. Brushes and pads not prop-
1. Attach brushes and pads
erly attached.
properly.
2. Accumulation of wax on
2. Wash and dry pads
does not
felt pads.
thoroughly.
glide easily
Service
To obtain approved HOOVER service and genuine HOOVER parts, locate
the nearest
Hoover Factory Service Center or Authorized Hoover
Warranty Service Dealer (Depot)
by:
checking the Yellow Pages under “Vacuum Cleaners
Household” OR
l
checking the list of Factory Service Centers provided
with this cleaner OR
l
calling l-800-944-9200 for an automated referral of
authorized service outlet locations (U.S. only)
Do not
send your cleaner to The Hoover Company in North Canton for
service, this will only result in delay.
If further assistance is needed,
contact The Hoover Company Consumer
Response Center, North Canton, Ohio
Phone:
In Canada,
contact Hoover Canada, Burlington, Ontario
Phone:
Always identify your cleaner by the
complete
model number when request-
ing information or ordering parts. (The model number appears on the rear
wheel cover of the shampoo-polisher.)
17
