background image

Warning:

 

Always unplug the Vacuum cleaner before performing maintenance/troubleshooting checks

Is there an accessory missing?

•  Check the ‘Machine Overview’ panel to make sure the part is included with your machine. 

Why does my vacuum cleaner have no power?

•  The plug may not be fully pushed into the electrical socket

•  Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse

•   The motor thermostat may have tripped. If this has happened, unplug the vacuum cleaner. Remove 

and empty the dirt container and check the hose for blockages. Clean the filters and allow the vacuum 

cleaner to cool for approximately 1 hour (if you have washed the filters you will need to wait 24 hours 

for the filters to fully dry before putting them back into the vacuum cleaner)

Why won’t my vacuum cleaner pick up?

•   The dirt container may be installed incorrectly remove the dirt container and re-attach making sure it is 

clicked firmly into place 

•   There may be a blockage in the hose. Please remove the hose from the vacuum cleaner, check and 

clear any blockages 

•  Empty the dirt container and clean filters. Go to the ‘Maintenance’

•  The brushbar may not be turning. Go to my brushbar isn’t turning below

•  If the accessory/tool will not pick up, check and clear any blockages

Why won’t the brushbar turn?

•  The brushbar may be clogged, check the brushbar and clear any hair or debris

•  The belt may be broken, Go to ‘Maintenance’

FAQs

10

Содержание Performance Floors & All HU86-FAL-S














Отзывы: