background image

PrEParing YOUr CLEanEr

Insert the removable handle into the body 

of the cleaner.

COrD CarE

3

4

1

2

5

CLEanEr rELEaSE

Unlock the cleaner by pressing down on the pedal 

with your foot.

POWEr SWiTCH

To switch the cleaner on or off press down on the 

pedal with your foot.

- 4 -

* Certain models only.

Place the power cord in the cord 

storage clip whilst in use.  This will 

prevent any accidental damage to the 

power cord.

DO NOT vacuum over the power cord.

CarPET CarE COnTrOL SELECTOr 

CarPET CarE COnTrOL SELECTOr 

The carpet care control selector raises and lowers 

the height of the nozzle.

Ensure that the cleaner is in the upright (parked) 

position and move the selector to the required 

setting for the carpet type or floor covering.
To obtain the best performance and energy 
efficiency

#1

it is recommended that the adjustment 

setting position 

is used for the main cleaning 

operations. The other adjustment settings are 

for ease of use, use on longer pile carpets, or for 

specialist cleaning tasks.

Settings

1. 

Best performance and energy efficiency, short to 

medium pile carpets, hard wooden floors, wooden 

floor boards with crevices, ceramic tiles.

2. 

Medium pile carpets, delicate floor coverings 

such as vinyl or linoleum, parquet flooring.

3 or 4.

 For longer pile carpets the motion 

resistance may increase. Use these intermediate 

settings to reduce the force required to push the 

vacuum cleaner.

5. 

Luxury carpet and Tool mode

imPOrTanT: 

Using this cleaner for loop pile 

carpets with pile greater than 30mm is not 

recommended. Please consult the floorcare/carpet 

manufacturer’s recommended cleaning instruction 

before vacuuming.

imPOrTanT: 

When cleaning delicate hard floors 

such as vinyl or linoleum the selector switch must 

be moved to position 

2. 

Failure to do so may cause 

damage to the floor surface.

This vacuum cleaner is supplied with an Energy 

Label as required by European Regulation (EU) 

665/2013. If the label shows a red prohibition 

circle on the right covering the hard floor symbol, 

then this indicates that the vacuum cleaner is not 

suitable for use on hard floors.

#1

nOTE:

 Dust pick up ability carpet, dust pick up 

ability hard floor, and energy efficiency in accord 

with Commission Regulations (EU) 665/2013 and 

(EU) 666/2013.

Содержание HU02











Отзывы: