7
Setting up the Cleaning Schedule
[Fig. 12]
Press the schedule button.
Press the Left/Right buttons to select a day.
Press the Up/Down buttons to select or deselect that day, several days can be selected.
When all required days are selected, Press the Play/Pause button to set.
* + Q K
Down buttons to set the hours.
Press the Play/Pause button to set the hours.
*
Press the Up/Down buttons to set the minutes.
Press the Play/Pause button to set the minutes.
An audible signal is given from the robot signifying that the schedule has been set.
() Q ;K*?5 button on the robot, then press the schedule
button on the remote control.
* G= ) ; *
start time, press the Schedule button
for approx. 3 seconds. The Schedule symbol in the display of
the remote control turns off.
Setting Power Level
Press POWER LEVEL button
on the remote control to select the desired power level. Choose
between Normal Power
and Turbo Power
.
Setting Cleaning Mode
AUTO
:
Press the on/ standby button on the device or the start/ pause button on the remote control
to start the cleaning process.
Robot will automatically choose the best cleaning mode to clean you room.
PARALLEL:
Press MODE button on the remote control for the robot to start cleaning under this
mode
.
SPOT:
Q `?=G ( )
circular path
.
EDGE:
Press MODE button on the remote control, It will automatically start cleaning along walls,
around furniture etc
.
MANUAL:
The Robot can be controlled using the arrows on the remote control.
RETURN TO BASE:
Press the button
on the remote control to send the robot to the charging
base. This mode can be activated during any cleaning cycle and the robot will automatically return to
the charging base.
When a cleaning cycle has been completed or the R5
the charging base automatically.
WARNING:
If there are obstacles in the room being cleaned, the robot might not be able to reach the
charging base. In this case, take the robot manually.
WI-FI SETUP
In order to access all the R5 ) ) /
H-GO 300 App.
You will be able to control the R )
App advantages:
• Control your robot in an easy and intuitive way.
• Activate the cleaning process from anywhere.
• Carry out settings and daily scheduling.
• Choose between its different cleaning modes.
Instructions:
1. Download the Hoover H-GO300 App from App Store or Google Play Store.
2. Press the ON/OFF power switch on the bottom robot.
[Fig. 9]
$ Q
4. Open the APP, create an account with your e-mail and a password.
&
6. Turn on the WIFI on your smartphone, input the WIFI password and connect the robot.
WARNING
• The Wi-Fi name and password cannot exceed 32 characters.
() ! ) )
* ) )
* #Z
* #Z ! [J /
Fig. 12
* Certain Models Only ** May vary according to model
GB
