5
23
24
25
26
27
28
33
34
32
31
29
30
Fig. 3
Fig. 2
Fig. 1
23
Trasmitter Diode
24
Suction Power
25
Button Forward
26
Button Left
27
Scheduling Button
28
Charging Station Button
29
Timing Setting Button
30
Button Backward
31
Button Right
32
Start/Pause Button
33
Mode Button
34
Display
GETTING TO KNOW YOUR ROBOT CLEANER
PREPARE YOUR ROBOT CLEANER
PACKAGING
Do not dispose of your Robot packaging. It may be required the validity of your guarantee in the future.
When unpacking your Robot and its accessories, take care to keep plastic bags away from babies,
young children and animals to avoid the risk of suffocation.
_) ) \
[Fig. 1]
From the second charge, it will take 4-5 hours to be fully recharged.
= 5 "%& $"%&
may damage the battery.
The mains power adaptor must only be connected to a standard mains power outlet.
BATTERY
For optimum battery performance it is recommended that you keep your robot batteries fully charged.
When the robot is not in use it should be left connected to the mains power adaptor. The robot has an
intelligent charging system. This prevents the batteries from becoming overcharged.
To avoid accidents, make sure that every person in the room is aware of the presence of the robot.
Charging Station Setup
Before use, remove obstacles that may get in the path of the Robot. Pay attention to:
• Objects that can be easily knocked over.
• Edges of carpets or rugs that it may get caught on.
• Floor length curtains and tablecloths.
/
• Power cords and cables.
• Fragile objects.
Plug in the mains power adaptor and connect to the charging station.
[Fig. 2]
1. Make sure the power cord is not caught underneath the charging station.
[ Q # ) ()
) ) )
locating the charging station.
3. There should not be any objects in the area around the charging station for 2 meters in front and 1
meter to each side.
[Fig. 2]
4. Make sure the power cord is not tangled or stretched. If there is an excess, use the power cord tie
to store it neatly.
5. Check that the dust container is inside on Robot.
6. Press the two rotary brushes labelled L and R onto the brackets until they click into place. Pay
attention to the designation L and R on the device as well as the brushes.
[Fig. 3]
7. Guide your Robot into the charging station to begin. During normal use, it will take approximately
4/5 hours to complete a full recharge.
NOTE:
_) ) \
* Certain Models Only ** May vary according to model
GB
