4
PRODUCT COMPONENTS
1 - Main Cleaner
2 - Handheld cleaner
3 - Filters
A.
Main Body
B.
On/Off Switch
C.
On/Off Turbo Switch
D.
Push and Go Release button
E.
Handheld Cleaning Unit
F.
Nozzle release Button
G.
Carpet and Floor Nozzle
H.
Charger
I.
Charger Indicator
J.
Power Cord
K.
Crevice Tool
L.
Dusting Brush
M.
Rigid Extension Tube*
N.
On/Off Switch
O.
Bin Empty Trigger
P.
Filter Access Button
Q.
Dust Container
R.
Filter Screen
S.
Filter
PREPARING YOUR CLEANER
1.
Line up the handle to the main body of the cleaner and push into the main body until it locks in place.
[4]
2.
Line up the nozzle with the main body and firmly push into the main Body until the nozzle locks into place.
[5]
3.
Assemble the handheld unit
[2]
to the main body.
4.
Place the cleaner on the charger. For first use, charge your cleaner for 24 hours.
5.
The indicator light will illuminate when charging.
Note:
To remove the nozzle press the nozzle release button and pull away from the main body.
Note:
Use only the charger supplied with your cleaner to recharge.
Important:
When charging the cleaner the On/Off switch must be OFF.
Keep the charger plugged into the socket at all times. It is normal for the charger to become warm to the touch when
charging.
If the operating times reduces after repeated use let the cleaner run until it stops then recharge for 24 hours, repeat this
monthly for best results.
USING YOUR CLEANER
Main cleaner
1.
Turn the cleaner on by pressing the On/Off button.
[1B]
2.
Set the On/Off Turbo switch to the desired cleaning mode.
[1C]
CARPET:
Switch Turbo Nozzle ON (LED will be ON.)
HARD FLOOR:
Switch Turbo Nozzle OFF (LED will be OFF.)
Handheld Cleaner
1.
Press the Push and Go button and lift the handheld unit from the cleaner main body.
{6]
2.
Turn the handheld cleaner on by pressing the On/Off button.
[2M]
ACCESSORIES
Rigid Extension Tube*, Crevice Tool and Dusting brush
All accessories are stored at the rear of the charger. All fit directly onto the handheld unit.
Freejet 3 in 1 IM Australia.indd 4
2/15/2012 11:00:24 AM
