Hootoo HT-IP009HDP, Руководство пользователя

Страница: 10 / 12

16/17
2.4.5 Motion Detection
To activate motion detection:
1) Set “Motion detection” status to ON
2) Select detection area on the screen by dragging your mouse
Note: You can select up to 3 detection areas
You can select sensitivity level. Higher sensitivity means smaller movement is required to
trigger the alarm.
Select Alarm Duration. This is how long the camera will record after alarm is triggered.
Video recording will also be saved in the same length.
3) Make the “ Enable ” and “ Time1 ” ticked, then you can select the time to activate motion detection
4) Tick ”Schedule”, and select the time you wish to set the motion detection on.
5) Once finished all settings, click “Save” to save your settings.
Note
：
Sensor can only be triggered by movements within the set motion detection area
2.4.6 Local Settings
You can set the length of each video recording and the saving path.
2.4.7 System
2.4.7.1 Log
You can check all system log here: login time, IP address and when was the system updated.
2.4.7.2 System
You can reset the camera and restore to factory setting. Also updating device UI and
firmware can be done here.