Security Solutions Partner
7
CAUTION:
Before installing and using the product, please read the following precautions carefully and make
sure they are fully understood.
Use only the power adaptor included with the product. Using unauthorized power adapters may cause
damage to your IP Camera.
IP Camera terminal shall be installed in an indoor environment where there is no rain or snow.
Do not touch the lens of the IP Camera. The optimum focus range has been set before it is delivered out of the
factory. If you turn the lens, it may cause incorrect focus and vague images.
Do not turn the Pan/Tilt by force, it may cause damage to internal components of the Pan/Tilt.
For firmware upgrading, please always contact us first via
.
2. SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double click the Icon “IP Camera Tool” and a dialog box
as Figure 1.8 will pop up
.
Figure1.8
Note:
The software searches IP Servers automatically over LAN.
There are 3 cases:
1. No IP Cameras found within LAN. After searching for 1 minute, the Result Field will show “not found IP
Server” and the program will shut down automatically.
2. IP Cameras have been installed within your LAN. All the IP Cameras will be listed and the total number is
displayed in the result field as shown in Figure 1.8
3. The IP Cameras installed within LAN do not share the same subnet with the monitoring PC. A prompt as
shown in result field (prompt:
Subnet doesn’t match, double click to change
!). Click the left mouse button to
Содержание HT-IP006N
Страница 1: ...HT IP006N Manual Book ...
Страница 31: ...Security Solutions Partner 31 Figure 6 3 Figure 6 4 Figure 6 5 ...
