Security Solutions Partner
42
Figure 9.1
Sender
: Make sure the sender mailbox server provider support SMTP, and the mailbox should not enable SSL
or TSL encryption too.
Receiver
: Here you can set four receivers. For receiver, there is no SMTP limitation.
SMTP Server
: The sender’s SMTP Server.
SMTP Port
: The sender’s SMTP Port, usually is 25, some SMTP server have its own port such as 587.
Need Authentication
: If there is SMTP user & password, please select authentication.
SMTP User
: Input correct SMTP User here. Some SMTP User is the sender’s full email address, such as
, some are without suffix, only the username, such as
test
.
SMTP Password
: Input correct SMTP password here.
NOTE:
Please click
Submit
firstly before choosing
Test
.
You will see the test result after click
Test
.
Figure 9.2
If it prompts these following errors when you click
Test
. Please check whether the information you filled in are
correct. Make sure all of them are correct and try it again.
1) Can’t connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
Содержание HT-IP006N
Страница 1: ...HT IP006N Manual Book ...
Страница 31: ...Security Solutions Partner 31 Figure 6 3 Figure 6 4 Figure 6 5 ...
