__________________________________________________________________________________________________
___________________________________________________________________________________________________
U398_UVATP_B_e_190425
7/17
6.2 Wiring Diagrams
Electrical connection must be carried out according to the appropriate wiring diagram. Faulty connection
can cause damage to persons and destruction of the electronics.
Do not install or wire up the transducer under mains voltage. Non-compliance can cause damage to
persons and destruction of the electronics.
In this connection and depending on the configuration of the equipment, one of the following wiring
diagrams must be observed
.
Wiring diagrams for measuring systems in customer-specific design
will be supplied separately.
6.2.1 Cable shielding connection in the cable glands
6.2.2 Power supply
Before connecting please check that the power supply is within the specification. Remove the housing
cover of the UVATP to reveal the type plate with all relevant information.
P
=
protective earth
