_________________________________________________________________________________________________
______________________________________________________________________________________
U426_flowtherm Ex_B_e_171206
23/34
5.3.19.3
Row 1
Selection of which measured value is allocated to input channel 1 and displayed as Row 1.
Selection:
Date
= actual date
Time
= actual time
Unit
= unit of selected flow sensor
Pt100 input
= temperature sensor Pt100
20mA input
= analog input 4-20 mA
10V input
= analog input 0-10 V
TAT input
= temperature measurement of thermal
sensor TA (only relevant if a TA sensor is selected under
Counter
= Counter (see 5.3.18)
5.3.19.4
Row 2
Selection of which measured value is allocated to input channel 2 and displayed as Row 2.
Selection:
5.3.19.5
Row 3
Selection of which measured value is allocated to input channel 3 and displayed as Row 3.
Selection:
5.3.19.6
Units for FA and VA sensors
Selection of unit for measured value display and data logger
Selection:
m/s
= flow velocity in meter / second
ft/min
= flow velocity in feed / minute
m3/h
= flow rate in m³/hour calculated flow velocity and measuring
section (FA: 5.3.2.2, VA: 5.3.8.1)
l/s
= flow rate in liter / second calculated from flow velocity and measuring
section (FA: 5.3.2.2, VA: 5.3.8.1)
l/min
= flow rate in liter / minute calculated from flow velocity and measuring
section (FA: 5.3.2.2, VA: 5.3.8.1)
cfm
= flow rate in cubic feet / minute calculated from flow velocity and
measuring section (FA: 5.3.2.2, VA: 5.3.8.1)
kg/h
= mass flow rate in kg / hour calculated from flow velocity and measuring
section (FA: 5.3.2.2, VA: 5.3.8.1), operating conditions (FA: 5.3.4, VA:
5.3.9), dstandard conditions (FA: 5.3.5, VA: 5.3.9) and the entered
standard density.
N-m3/h = standard flow rate in standard-m³ / hour calculated from flow velocity
And ,easuring section (FA: 5.3.2.2, VA: 5.3.8.1), operating conditions
(FA: 5.3.4, VA: 5.3.9) and standard conditions (FA: 5.3.5, VA: 5.3.10).
N-l/min = standard flow rate in standard-liter / minute calculated from flow velocity-
and measuring section (FA: 5.3.2.2, VA: 5.3.8.1), operating conditions
(FA: 5.3.4, VA: 5.3.9) and standard conditions (FA: 5.3.5, VA: 5.3.10).
