_________________________________________________________________________________________________
______________________________________________________________________________________
U426_flowtherm Ex_B_e_171206
27/34
5.3.23.1
On / Off
Selection:
Data logger: = On or Off
Switch data logger on or off
With data logger on the data for long-term measurement
(see 5.3.20) is saved to the data logger
The data logger can also be switched on from the measured value
display with
LOGGER (via Selection: Settings -> Data logger
or with
LOGGER-OFF switched off.
5.3.23.2
View
The contents of the data logger are shown on the display:
With
to the next data set
With
back to menu
With
or
MESS back to measured value display
5.3.23.3
Settings
Designation: = freely adjustable measuring point designation with max. 8 digits for
all subsequently saved data logger values until entering a new measuring
point designation.
5.3.23.4
Delete
Delete the contents of the data logger:
Before deleting a prompt appears:
Delete data logger? Confirm with
. Cancel with
or
MESS.
All the values saved to the data logger are deleted accordingly.
Before deleting, the data logger contents should be downloaded and saved via the USB port to a Windows
PC with the help of the optional HLOG II software, otherwise they will be lost.
Device status:
5.3.24
Device status
Menu -> Status
Display of status:
Hardware:
= hardware version
Software:
= software version
S. No.:
= serial no.
Memory/%:
= display of free space for data logger in %
Battery/%:
= display of battery capacity in %
"0" is displayed when supply is via the USB connection.
Profile:
= last loaded profile (see 5.3.25)
TA-Version:
= version of TA-Modul
