UVAHAND LED
10
# 073350DE-EN b
WARNING!
The radiation source of the UVAHAND LED emits
UV radiation, see also "Danger from irradiation," p. 11.
2.10.
Danger from electrical power
The electrical equipment of the
UVAHAND LED must be inspected regu-
larly.
Inspection before starting work:
Check all components of the unit for
outwardly visible damage
Check that all electric cables are
in flawless condition
Loose cable connections must be re-
paired immediately, and damaged cables
must be replaced.
DANGER!
There is danger of direct or indirect contact with electricity!
WARNING!
The UVAHAND LED may only be connected to properly in-
stalled power sockets with a protective ground conductor. Fur-
thermore, the UVAHAND LED may only operated with the mains
voltage specified in the technical data.
2.11.
Thermal hazards
The following safety precautions must be observed when operating the UVAHAND
LED:
Never touch the safety glass plate
when operating the unit.
There must be a safe surface
available on which to place the
switched-on hand-held lamp.
The hand-held lamp is fitted with
spacer bars to prevent destruction
of the safety glass plate as a result
of heat build-up. However, it must
never be placed on a temperature-
sensitive or combustible surface.
There must be a distance of
at least 1m between the unit and
flammable objects.
The LED light-emitting surface
may not be directly covered.
The UVAHAND LED must not be
used inside explosion-protected
areas!
Danger from
electrical power
Thermal haz-
ards