honle 078350 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

honle 078350 Скачать руководство пользователя страница 12

LED Powerline ACIC

12

#078734DE-EN e

2.10. Warranty and liability

The Dr. Hönle AG "General Conditions of Sale and Delivery" always apply.
They are available to the operator upon signing the contract, at the latest.
No warrants or liability claims may be made in the event of injury to persons
or damage to property, in particular if this injury or damage has arisen due
to one or more of the following:



improper use



incorrect mounting, commissioning, start up and operation,



operation with defective and/or non-functional safety and protective

devices,



failure to comply with the information in the operating instructions re-

garding safety, transport, storage, mounting/installation, commission-
ing, operation and maintenance of the unit,



unauthorised structural modifications,



inadequate monitoring of parts which are subject to wear,



incorrectly performed repairs,



failure of the cooling unit and/or operation of it that is non-compliant

with the specified operating conditions (see Technical Data)



the action of foreign bodies or mechanical damage,



catastrophes,



force majeure

Warranty and
liability

«
...
10
11
12
13
14
...
»

Содержание 078350





























Отзывы:

Нет отзывов