7
13. Pull remaining cable and tool from sewer.
After using, thoroughly flush and drain cables,
couplings and tools with water due to damaging
effects of some drain cleaning compounds.
Special Procedures
Reverse Operation
Running machine in reverse will cause premature
failure of cable. Use reverse only to free a tool or
cable caught in an obstruction. If this should occur,
immediately release clutch handle and place
FOR/OFF/REV switch to OFF position. After motor
comes to a complete stop, place FOR/OFF/REV
switch in the REV (reverse) direction. Engage clutch
handle only until cable or tool is free of obstruction.
Once it is free, release clutch handle immediately.
Turn unit OFF. Run unit in FOR (forward) direction
and follow normal operating procedure.
Never operate this machine in REV (reverse) for any
other purpose. Operating in reverse can damage a
cable and cause serious injury.
Maintenance Instructions
WARNING
Make sure machine is unplugged from power source
before performing maintenance or making any
adjustment.
Lubrication
Lubricate machine with grease at grease fitting
(located on jaw housing) once a week if used every
day; once a month if used less. Place a drop of oil
on each of the bearing points, thrust bearing, clutch
jaws, etc., at least once a year.
Cables
Cables should be thoroughly flushed with water to
prevent damaging effects of sediment and drain
cleaning compounds.
Periodically lubricate cables and couplings.
When not in use, store cables indoors to prevent
deterioration by the elements.
Cables should be replaced when they become
severely corroded or worn. A worn cable can be
identified when outside of coils become flat.
Clean inside of drum and flange assembly. Certain
cleaning agents and solvents damage plastic parts.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
Avoiding use of these and other types of cleaning
agents minimizes the probability of damage.
Reinstall the flange assembly to the drum and
replace cable.
Machine Storage
Motor-driven equipment must be kept indoors or well
covered in rainy weather. Store the machine in a
locked area that is out of reach of children and
people unfamiliar with drain cleaners. This machine
can cause serious injury in the hands of untrained
users.
If machine has been exposed to freezing weather,
unit must be run for ten (10) to twenty (20) minutes
without load to warm up. Failing to do this will result
in frozen bearings. If machine is exposed to weather
for a period of time, moisture will form across motor
windings causing motor to burn out.
How to move the machine?
1. Pull down the black sleeve and pull out
the handle lever
.
2. Change the direction of the handle, insert the
handle into the hexagonal sleeve again, and
loosen the black knob.
3. In this way, the machine can be transferred like
a trolley.
Содержание A200
Страница 9: ...8 ...
