Honeywld PowerZest HD-301, Руководство пользователя

Страница: 13 / 91

Honeywld Technology Corp 13
Set Up PowerZest
Follow these steps to set up PowerZest
Turn on the TV. Set the video sources selector on your TV to match the connection from
your PowerZest. For example, if you used HDMI, set the TV to use “HDMI” Input
1. Turn on PowerZest. The LED on the front panel of the PowerZest lights up to show
that it is powered on.
2. Check the TV display. The default display of PowerZest is Composite(CVBS). If
you use HDMI, aim the remote control at the Power
Zest and push “Output” Key. You can cycle through the TV modes to get the
correct display.
3. Wait few seconds for the start up page to show up, and it will turns into the Main Menu
Afterwards.
4. The start up page will last for only few seconds, and then go to a black screen. Please
wait few seconds and it will enter into the Main Menu. If there is still no video output after
the start up page appears, please make sure the PowerZest and the TV are in the same
mode. If not, please cycle through the “Output” key on the remote control, wait
few seconds during each cycle.
Fig 1-4 Start Up Page