Honeywell
61
OUTPUT NOTES
Free-form field.
i.e., “17-in Monitor – Top Left in Surveillance Bay 2”
LOCATION
Enable
Enable output title.
X pos
X position of the output title
Y pos
Y position of the output title
Steps for Configuring Video Output Detail
1. On
the
Outputs
screen, select the
Detail
tab on the right side of the window.
2. Select
the
Output Number
to be used for this output.
3. Enter
the
Physical O/P
address of the output connection.
4. Select
Monitor
for the Output. Other options are intended for future releases of the
Matrix Switcher.
5. Enter/edit
the
Output
Name
. Include the output number in the name entered as it
does not appear on its own in displays or reports.
6. Enter/edit
a
Short Name
for the output.
7. If audio is associated with this output, check the box to
Enable
audio and
enter the physical address of the audio output.
8. Enter
Notes
about this output in this free-form field. It is helpful to include the output
location in this field.
9. Select
to save/download all information from the current page.
Output Access
The
Outputs Access
tab is used to set permissions for all video outputs.
Содержание VideoBloX
