Honeywell UltraKey Lite HJC5000 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 72

Honeywell UltraKey Lite HJC5000 Скачать руководство пользователя страница 58

58

Installing UltraKey Lite with MAXPRO-Net

Step 4: Configure the Controller for an Ethernet Connection

1.

Press

Alt > Clr

to exit from the VideoBloX configuration menu.

2.

Press

Alt > Clr

a second time to enter the

System Set

top menu.

3.

Press the LCD down arrow key to scroll to the

System Set

:

Config

menu.

4.

Press the right arrow key to enter the

Configuration

menus.

5.

Press the LCD up/down arrow keys to scroll through the options (serial port, network,
language, back light, slider update, cascade linkage, hardware test, about).

6.

Scroll to the

Configuration: Network

menu, then press

Ent

.

7.

There are three sub-menus in this menu (Show Net Infor,
DHCP, and Manual Settings). The structure is as follows:

Show Net Infor Menu

The Show Net Infor Menu displays the Network information, including IP Address, DNS,
Gateway, and Netmask.

Automatically Configuring the Network Using DHCP

The Dynamic Host Configuration Protocol (DHCP) is a computer networking protocol used
by devices (DHCP clients) to obtain configuration information for operation in an Internet
Protocol network. It is used to configure the network automatically.

Automatically configuring the network using the

DHCP

menu:

1.

Press the LCD down arrow to scroll to the

Network: DHCP

menu.

2.

Press

Ent

and the keyboard's network will be configured

automatically.

•

If the network configuration is successfull, then a

Succeeded!

message displays.

•

If the network configuration was not successful, then a

Failed!

message displays.

System Set:
CONFIG

Configuration
Network

Network

Show Net Infor

DHCP

Manual Setting

Network:
DHCP

Network:
Show Net Infor

Network:
Manual Setting

Network:
DHCP

Please wait....

Succeeded!

Failed!

«
...
56
57
58
59
60
...
»

Содержание UltraKey Lite HJC5000









































































Отзывы:

Нет отзывов