Installation Guide
69-2271EFS—01
4
Tools Required
- 3/8-in. hex drive
- Drill or duct-cutting tool
- Wire stripper/cutter
- Standard screwdriver
- Duct tape
- 8-in. round duct and starter collar
- 18–22 gauge, 5-band thermostat wire
- 1/2-in. diameter drain line (8 ft)
- 1/2-in. drain clamps (quantity 2)
Materials Provided
- Sheet metal screws (quantity 9)
- 6-in. plastic duct collar
- 10-in. plastic duct collar
- 10-in. oval x 4 in. plastic duct collar
Options:
- 1/2-in. drain p-trap (may be required by local code)
- External humidity control
• Manual dehumidistat (H8908DSPST), Auto
Ventilation (W8150A1001)
• TrueIAQ (DG115EZIAQ)
• VisionPRO IAQ (YTH9421C1010)
Installation Checklist
WARNING:
Installation must be performed by a qualified service technician and must comply with local
codes. Remove power to the device before installing or servicing the device. Failure to connect the
device according to these instructions may result in damage to the device or the controls.
Intended Application
For the ideal installation, draw air from the central part of the home and return it to isolated areas of the home like
the bedrooms, den, utility room, or family room. The ductwork of the existing system can be used to supply air to
the home.