Honeywell Thor VX8, Справочное руководство

Страница: 98 / 228

Status Tab
Start > All Programs > Summit > Summit Client Utility > Status tab
This screen provides information on the radio:
l
The profile being used
l
The status of the radio card (down, associated, authenticated, etc.)
l
Client information including device name, IP address and MAC address.
l
Information about the Access Point (AP) maintaining the connection to the network including AP name, IP address and
MAC address.
l
Channel currently being used for wireless traffic
l
Bit rate in Mbit.
l
Current transmit power in mW
l
Beacon period – the time between AP beacons in kilomicroseconds. (one kilomicrosecond = 1,024 microseconds)
l
DTIM interval – A multiple of the beacon period that specifies how often the beacon contains a delivery traffic indication
message (DTIM). The DTIM tells power saving devices a packet is waiting for them. For example, if DTIM = 3, then
every third beacon contains a DTIM.
l
Signal strength (RSSI) displayed in dBm and graphically
l
Signal quality, a measure of the clarity of the signal displayed in percentage and graphically.
There are no user entries on this screen.
Note: After completing radio configuration, it is a good idea to review this screen to verify the radio has associated (no
encryption, WEP) or authenticated (LEAP, any WPA), as indicated above.
4-12