background image

D

GB

 www.docuthek.com

I

© 2017 Elster GmbH · Edition 08.17

alpha

Safety

Please read and keep in a safe place

 Please read through these instructions 

carefully before installing or operating. Following the 
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned 
in accordance with the regulations in force. These 
 instructions can also be found at www.docuthek.com.

Explanation of symbols
 • ,   ,   ,   

... = Action

 

= Instruction

Liability

We will not be held liable for damage resulting 
from non-observance of the instructions and non- 
compliant use.

Safety instructions

Information that is relevant for safety is indicated in 
the instructions as follows:

 DANGER

Indicates potentially fatal situations.

 WARNING

Indicates possible danger to life and limb.

 CAUTION

Indicates possible material damage.

All interventions may only be carried out by qualified 
gas technicians. Electrical interventions may only be 
carried out by qualified electricians.

Conversion, spare parts

All technical changes are prohibited. Only use OEM 
spare parts.

Changes to edition .

The following chapters have been changed:
–  Checking the usage
– Logistics

Contents

D

GB

F

NL

I

SK

GB-1

1000106001-002-06

Operating instructions for 

 operators and installers

Translation from the German

Safety

Contents

Electronic index EI . . . . . . . . . . . . . . . . . . . . . 
Contents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Checking the usage . . . . . . . . . . . . . . . . . . . . . 
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Operating the electronic index . . . . . . . . . . . . 
Navigating within the menu  . . . . . . . . . . . . . . 
Service mode  . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Establishing an optical communications link 7
Changing the battery . . . . . . . . . . . . . . . . . . . . 7
Setting the index parameters . . . . . . . . . . . . . 8
Releasing the valve  . . . . . . . . . . . . . . . . . . . . . 8
Retrofitting/replacing the communication 

module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Check test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Assistance in the event of malfunction  . . . . 4

Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Technical data  . . . . . . . . . . . . . . . . . . . . . . . . 5

Logistics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Contact  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Electronic index EI

03250952

Содержание Themis alpha EI2

















Отзывы: