background image

v

Contents

Warnings and Cautions  ........................................................................................1

Before installation .................................................................................. 1
Fire Safety and Liability Notice  .............................................................1

Damage during shipment .....................................................................1
Electrostatic discharge .........................................................................1
Disclaimer – Product Liability; Mutual Indemnification ...................  2
Compliance .......................................................................................... 2

Unpacking...............................................................................................................3

Shipping instructions  ...........................................................................................4

Limited warranty  ...................................................................................................5

Confidentiality ........................................................................................................6

Device overview  ....................................................................................................7

Preparing for installation.......................................................................................8

Contents of the kit  ..................................................................................8

Readers .................................................................................................8
Supports ...............................................................................................8
Toolkit for reader .................................................................................8
Toolkits for supports ............................................................................ 9

Mounting tools  .....................................................................................10
Wire characteristics  ..............................................................................10

Power supply wire .............................................................................10
Ethernet connector and cable  .............................................................11
Input/output/RS485 wire ....................................................................11

Mounting the device ............................................................................................13

Device connectors  ................................................................................13
Mounting the reader on the support ......................................................14

Mounting the reader on the wall mount .............................................14
Mounting the reader on the swivel support  .......................................21

Содержание Tema-Voyager Compact



























































Отзывы: