Honeywell T7200D, Руководство по установке

Страница: 7 / 12

62-0128—2
7
T7200D,E SERIES 2000 COMMERCIAL MICROELECTRONIC THERMOSTATS
Heat
Auto
System Fan
Off Auto
Un
Mon
Wait
Lo
In
Room
Remote
%Humid
Auto
Sav
AM
PM
Comm
Cool
Duct Only
On
Recovery
Hi
Med
Cool
TueWedThuFriSatSun
Occupied 12 Override
M4916
Aux Ht
Em Ht Em Ht
Set Program Set Day/Time Set Day/Time Start Time Temporary Setting Enrg
Em Heat
M10257A TEST NUMBER
NOTE: If a duct temperature sensor is installed, the duct
temperature is also displayed.
Refer to Table 4 and Thermostat Information section for
directions and results of the specific system tests.
NOTE: Press Run Program to exit the system test. The
system test times out after four minutes if there
are no additional key presses.
Fig. 10. LCD display of all segments.
Fig. 11. Test number display.
Table 4. Installer System Test Options.
Key to Press
Test
Number Description
Heating Equipment Test
Heat/Cool Settings
10 Enter heating equipment test.
▲
11 Heat turns on. The system fan is also energized.
▼
10 Heat and system fan turn off.
Cooling Equipment Test
Heat/Cool Settings
30 Change from heating to cooling equipment test.
▲
31 Cool and system fan turn on.
▼
30 Cool and system fan turn off.
Fan Equipment Test
Heat/Cool Settings
40 Change from cooling to fan equipment test.
▲
41 Fan turns on.
▼
40 Fan turns off.
Key Operation Test
Heat/Cool Settings
60 2 Change from fan to key operation test.
Unoccupied Temp
60 0 Unoccupied Temp test number is displayed.
Occupied Temp
60 1 Occupied Temp test number is displayed.
▲
60 3 Increase test number is displayed.
▼
60 5 Decrease test number is displayed.
Clear Start Time
60 7 Clear Start Time test number is displayed.
Day
60 8 Day test number is displayed.
Copy
60 9 Copy test number is displayed.
Unoccupied Start
TIme
60 10 Unoccupied Start Time test number is displayed.
System
(select models)
60 11 System test number is displayed.
Fan (select models)
60 12 Fan test number is displayed.
Set Current Day/Time
60 14 Set Current Day/Time test number is displayed.
Run Program
60 15 Run Program test number is displayed.
Temporary Occupied
60 16 Temporary Occupied test number is displayed.
Occupied Start Time
60 17 Occupied Start Time test number is displayed.
Continuous
Unoccupied
60 19 Continuous Unoccupied test number is displayed.