Honeywell SMV800, Руководство пользователя

Страница: 176 / 220

Page 164 SMV800 Modbus User's Guide Revision 1.0
Totalizer base
unit
conversion
factor 749 The user may select any of
the standard engineering
units, or custom units. For
custom units, the user must
provide a units tag name, a
base unit, and a conversion
factor for converting from the
base unit to the custom unit.
(value in Custom unit =value
in base unit * conversion
factor) R/W float N/A
Totalizer Base
Value 751 When the Totalizer is set to
Run mode after a Reset, it
will start incrementing /
decrementing from this base
value. R/W float N/A
Negative
totalizer Value 753 This is the Totalized Flow for
Reverse flow only. The
Negative Totalizer will
decrement when the Flow
Rate is a reverse flow
(negative flow value).
Note that the Reverse Flow
configuration setting must be
enabled to calculate negative
flow.
RO float N/A
Positive
Totalizer value 755 This is the Totalized Flow for
Forward flow only. The
Positive Totalizer will
increment when the Flow
Rate is a forward flow
(positive flow value). RO float N/A
Reserved for
device specific 757 RO
Reserved for
device specific 759 RO
Differential
Pressure UTL 765 Differential Pressure Upper
Transducer Limit RO Float N/A
Differential
pressure LTL 767 Differential Pressure Lower
Transducer Limit RO Float N/A
meterbody
Temperature
UTL 769 Meterbody temperature
Upper Transducer Limit RO Float N/A
meterbody
Temperature
LTL 771 Meterbody temperature
lower Transducer Limit RO Float N/A
Static
Pressure UTL 773 Static Prssure Upper
Transducer Limit RO Float N/A
Static
Pressure LTL 775 Static Pressure Lower
transducer limit RO Float N/A
Reserve For
Device
Specific 777 NOT USED RO Float NOT USED