background image

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in 
this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes 
have been made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential 
damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the 
selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this 
document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Copyright 

 

2017-2021

 

Honeywell International Inc.

 

All rights reserved.

Web Address:

 

sps.honeywell.com.

Trademarks

Microsoft Windows

 

7, Windows

 

8, Windows

 

Mobile, and Windows

 

CE are trademarks or registered trademarks of Microsoft 

Corporation.

Wavelink Avalanche is a registered trademark of Wavelink Corporation.

The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc.

Android is a trademark of Google Inc.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other 
companies and are the property of their respective owners.

Patent

For patent information, refer to 

www.hsmpats.com.

Firmware (Software) Agreement

The enclosed firmware (software) resident in the printer is owned by Licensor or its suppliers and is licensed for used only 
on a single printer in the user’s trade or business. The user agrees not to, and not to authorize or permit any other person or 
party to, duplicate or copy the firmware or the information contained in the non-volatile or programmable memory. The 
firmware (software) is protected by applicable copyright laws and Licensor retains all rights not expressly granted. In no 
event will Licensor or its suppliers be liable for any damages or loss, including direct, incidental, economic, special or 
consequential damages, arising out of the use or inability to use the firmware (software).

Содержание RP2B







































































Отзывы: