Honeywell Rapid Eye, Руководство по установке

Страница: 24 / 82

24
Installation
Unpack the DVR
1. Open the box and remove the Multi-Media DVR, the power cord, and the other
contents of the box (see
Table 2-1 ).
2. Remove the plastic bag that surrounds the DVR.
3. Store the box and packaging materials.
Caution Do not remove factory seals on a Rapid Eye Multi-Media DVR. Doing so will
void your warranty.
There are no user-serviceable parts inside.
Damaged Unit or Missing Goods
In the unlikely event that the DVR is damaged, or parts are missing:
1. Make a note of the DVR serial number, located on a sticker on the bottom of the DVR.
2. Call your Rapid Eye supplier to describe the problem. The supplier will ask for the
DVR serial number and will assign a Return Merchandise Authorization (RMA)
number.
3. Make a note of the RMA.
4. Repack the DVR in its box, along with the other contents.
5. Prominently display the RMA on the shipping carton.
6. Return the packaged DVR to the location specified by your supplier.
Overview of the Installation Procedure
After unpacking the DVR:
1. Connect one or more cameras to the DVR.
2. According to the communications that you plan to use, connect the DVR to a
telephone line, your network, or both.
3. Power up the camera(s) and the DVR.
Mouse pad K0007V1
CD, Rapid Eye Multi-Media software 100-01420
Documentation CD, includes all documents needed for your unit 100-01429
a
One of each is provided, unless otherwise noted.
Table 2-1 Contents of Rapid Eye Hardware Kit 100-01205 (cont’d)
Item
a
Part #