4
5
On/Off
Press the
Power button
( ) once to turn the fan on. Press the
Power button a second time to turn the fan off (Fig.12/13).
Speed Control
To adjust the speed up or down, press the
Fan Speed button
( ) repeatedly to increase level (Fig.12/13).
Timer
Choose from 1, 2, 4, or 8 hour settings by performing the
following function (Fig.12/13):
• 1 hour: Press the
Timer button
( ) once.
• 2 hours: Press the
Timer button
twice.
• 4 hours: Press the
Timer button
a third time.
• 8 hours: Press the
Timer button
a fourth time.
Press the
Timer button
a fifth time to turn the
Timer feature off (Fig. 12/13).
REMOTE CONTROL BATTERY INSTALLATION/
REPLACEMENT INSTRUCTIONS
A.
Remove battery door by sliding downward in direction of
arrow.
B.
Insert 2 AAA batteries into the remote following the directional
guides in the recessed slots (Fig. 9). Batteries are not included.
C.
Replace battery door by sliding upward opposite of arrow
direction until door snaps in place.
NOTE: DO NOT
MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE, STANDARD
(CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.
SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.
ASSEMBLY INSTRUCTIONS (continued)
Fig. 9
On/Off
To turn fan on, press the
Power button
( ) located at the
bottom of the control panel (Fig. 10).
Speed Control
To adjust the speed up or down, press the
Fan Speed
button
( ) repeatedly to increase level (Fig. 10).
Timer
Choose from 1, 2, 4, or 8 hour settings by
performing the following function (Fig. 10):
• 1 hour:
Press the
Timer button
( ) once.
• 2 hours:
Press the
Timer button
twice.
• 4 hours:
Press the
Timer button
a third time.
• 8 hours:
Press the
Timer button
a fourth time.
Press the
Timer button
a fifth time to turn
the Timer feature off.
Oscillation
To activate or disengage the fan oscillation,
push down or pull up the Oscillation knob
respectively (Fig. 11).
FAN OPERATION
FAN OPERATION
HS1655, HS1665 SERIES FAN OPERATION
Oscillation knob
Up/
ON
Down/
OFF
Fig. 11
Model HS-1655C,
HS-1665C
Power
Timer
Speed
Fig. 10
HS1655, HS1665 SERIES REMOTE CONTROL OPERATION
Speed
Timer
Power
Fig. 13
Fig.
12
USER SERVICING INSTRUCTIONS
Cleaning and Storage
• Be sure your fan is in the OFF position.
• Unplug the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
•
DO NOT
immerse the fan in water and never allow water to enter the
Motor Housing.
•
DO NOT
use gasoline, paint thinner or other chemicals to clean the fan.
Removal of the Front Grille for Cleaning
• Remove the Front Grille by releasing the Grille clips.
• Unscrew the Blade Knob by turning it CLOCKWISE (REVERSE THREAD).
• Pull the Fan Blade away from the Motor Housing.
• Gently wipe the Fan Blade and Grilles with a soft, damp cloth.
• Assemble the fan by following the last three steps in the ASSEMBLY
INSTRUCTIONS.
To Disassemble The Fan Pole And Base
• Release the latch and unscrew the Motor Housing to remove.
• Twist the Pole counter-clockwise 90° and pull up to remove it from the Base.
• For storage, disassemble and clean the fan carefully as instructed. Store the fan
in its original box. You may also leave the fan fully assembled and covered with
plastic to protect it from dust. Store your fan in clean, dry place.
