Honeywell PX4i, Руководство пользователя, Страница: 90 / 158

78 PX4i and PX6i High Performance Printer User Guide
2. View or update your settings.
3. Click Submit 802.11 settings.
Use the following table to understand the Wireless LAN settings.
Configuring 802.1x Settings
The 802.1x settings page is only available if you have the optional wireless inter-
face installed in your printer. Use the 802.1x page to view and change 802.1x secu-
rity settings.
Setting Description
SSID The network name of the printer.
Mode Set the operating mode of the device to Ad-Hoc or Infrastructure.
WEP Set Wired Equivalent Privacy (WEP) to on or off.
WEP Keys You can enter values for up to 4 WEP keys.
Active WEP key Chooses the active WEP key.
Authentication Sets the type of authentication to use for your WEP keys. You can
choose between Auto, Open System, and Shared.
WPA Sets the Wi-Fi Protected Access (WPA) to either on or off.
WPA Pre-shared key Sets the WPA Pre-shared key.
WPA2 Sets the Wi-Fi-Protected Access version 2 to either on or off.
Roaming setting Sets the roaming reluctancy to 1, 2 or 3. Setting the roaming reluctancy
to 0 turns off the roaming feature.
Current channel (Read only or read/write for adhoc connections) Shows the current
channel being used.
AP MAC Address (Read only) MAC address of the access point to which the printer is
connected.
Signal strength (Read only) Radio signal strength of the access point.
Speed (Read only) Speed of the current connection.
Region (Read only) Shows the country short names provided by the 802.11d
standard for the currently selected region or country.