Honeywell PX4i Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 158

Honeywell PX4i Скачать руководство пользователя страница 137

PX4i and PX6i High Performance Printer User Guide

125

If you are running Fingerprint or Direct Protocol, you can control the paper cutter
using the commands CUT, CUT ON, and CUT OFF. For help, see the

Fingerprint

Command Reference Manual

.

Media Roll Retainer

Use the media roll retainer with a rotating media supply hub to keep large media
rolls in place.

76 mm (3-in) Adapter

Use the 76 mm (3-in) adapter with a rotating media supply hub to use media rolls
with 76 mm (3-in) inner diameter cores. The adapter cannot be used with a media
supply roll post.

Internal Fanfold Guides

Use the internal fanfold guides to facilitate loading media from an external supply.
The internal fanfold guide cannot be used in peel-off (self-strip) mode or with the
label slack absorber.

Label Taken Sensor

The label taken sensor (LTS) is a photoelectric sensor that enables the printer’s
firmware to detect if the last printed label, ticket, tag, etc. has been removed before
printing another copy. The LTS cannot be used with a paper cutter.

If you are running Fingerprint or Direct Protocol, you can enable or disable the LTS
using the commands LTS& ON and LTS& OFF. For help, see the

Fingerprint Com-

mand Reference Manual

.

Real Time Clock

The Real Time Clock (RTC) automatically keeps track of the current time. The RTC
has its own backup battery backup that lasts for at least 10 years.

CompactFlash Protection Plate

The protection plate provides extra security by covering a CompactFlash card
inserted in the back of the printer.

Interface Boards

A number of interface boards are available for use with the printer. The interface
boards are either installed at the factory or can easily be installed by an authorized
service technician.

The printer can accommodate these interface boards:

•

802.11 Radio Interface Board

•

Parallel Interface Board (IEEE 1284)

•

Double Serial Interface Board

«
...
135
136
137
138
139
...
»

Содержание PX4i































































































































































Отзывы:

Нет отзывов