Appendix B — Default Settings
52
PC42t Desktop Printer User Guide
Print Quality Settings
This section describes print quality settings. To view these settings:
•
From the printer web page, click the
Configure
tab >
Printing
>
Quality
.
General System Settings
This section describes general system settings. To view these settings:
•
From the printer web page, click the
Configure
tab >
System
Settings
>
General
.
Length (Slow
Mode)
If Media Calibration Mode is set to Slow, the printer
prints the media length plus 10 mm. This value sets
an additional amount of media to be printed. Unit of
measurement is defined in the Unit of Measurement
parameter. Range is 80 to 3200.
0 dots
Power Up Action
Sets the action when you turn the printer on:
•
No Action
•
Formfeed - The printer feeds one label.
•
Testfeed - The printer prints two configuration
labels as it calibrates the media sensors.
No Action
Head Down
Action
Sets the action when you close the print mechanism
after opening it:
•
No Action
•
Formfeed - The printer feeds one label.
•
Testfeed - The printer prints two configuration
labels as it calibrates the media sensors.
No Action
Media Settings (continued)
Setting
Description
Default
Print Quality Settings
Setting
Description
Default
Print Speed
Sets how fast the printer prints labels. The unit of
measure is defined in the Unit of Measure parameter.
100
Darkness
Sets the image darkness for media and ribbon. Adjust
this parameter with the Media Sensitivity parameter.
Range is 1 to 100.
Variable
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309