Chapter 1 — About the Printer
10
PC42t Desktop Printer User Guide
Load External Media
You can place the media supply, such as fanfold tickets or tags, behind
the printer. You need to purchase an external media holder separately.
1
Place the media behind the printer.
2
Feed the media into the printer through the external media feed slot.
3
Thread the media through the printer and adjust the media holders
and sensor as you would for media that loads inside the printer.
Load Ribbon
You need to use thermal transfer ribbon to print on thermal transfer
media. Make sure to select ribbon that matches the face materials of the
media to obtain the best durability and print quality.
Note:
Make sure to protect the media from direct sunlight and from
dust, dirt, or other foreign particles that can impair the printout quality or
cause unnecessary wear to the printhead.
External media
feed slot
Note:
The PC42t can only use ribbon that is “ink out,” which means that
the ribbon is loaded with the inked side (the dull side) facing out.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
