Appendix B — Default Settings
PC42t Desktop Printer User Guide
49
Ethernet Settings
This section describes the Ethernet IPv4 settings. To view these
settings:
•
From the printer web page, click the
Configure
tab >
Communications
>
Ethernet
.
Media Settings
This section describes media settings for the printer. To view these
settings:
•
From the printer web page, click the
Configure
tab >
Printing
>
Media
.
New Line
Character
Defines the characters that the printer echoes to the
host to indicate that it has moved to a new line.
CR/LF
Serial Port Settings (continued)
Setting
Description
Default
Ethernet Settings
Setting
Description
Default
IP Assignment
Method
Specifies how the printer obtains an IP address.
DHCP
IP Address
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask
Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
0.0.0.0
Default Router
Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
0.0.0.0
DHCP Response
Specifies if the printer receives DHCP responses by
broadcast or unicast.
Broadcast
Note:
If the printer is not connected to a network, you need to use
PrintSet 5 through a USB connection to configure the media settings.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309