Honeywell Optimus 5100, Руководство пользователя

Страница: 19 / 64

3 - 7
Installing Memory Cards
The 5100 supports Micro Secure Digital (SD) memory cards. You can purchase these SD cards by
contacting your Honeywell sales representative.
To install an SD card
1. Press the Power key to put the terminal in Suspend Mode; see Suspend Mode on page 3-13.
2. Remove the battery.
3. Insert the SD card with the label facing upward.
Note: To remove an installed SD card while the battery door cover is open, tap on the edge lightly to unlock the card;
the card will pop out just enough for you to grab its edge and pull it out.
4. Replace the battery and battery door cover.
5. Tap the Power key to resume operation.
6. To verify that the operating system recognizes the new memory card, open Windows Explorer and
navigate to My Device\Storage Card.
Top Panel Features
Laser Engine Window
If you terminal is equipped with a 4813 laser engine, the angled engine reads and decodes 1D
bar code symbologies. For more information, see
Using the Laser Engine on page 5-1.
Image Engine Window
If you terminal is equipped with a 5300SR image engine, the angled engine reads and decodes
most popular bar code symbologies and takes images like a digital camera. For more
information, see
Using the Image Engine on page 6-1.
Engine Window
(with engine)