Honeywell NS2 Скачать руководство пользователя | Manualshive

Страница: 19 / 20

background image

7-101004-01

19

Honeywell Access Systems

NS2 Configuration Guide

Frequently Asked Questions

Question:

What pre-packaged kits are available?
Honeywell Access has made the NS2 available in pre-packaged kits to make ordering easier.

Question:

How many access points can I control with the NStar access control system?
NStar software will support up to 128 access points. System expansion is via RS-485 or TCP/IP.

Question:

How does the NStar software communicate to the NS2 panel?
NS2 panels communicate using either RS-485 or RS-232 protocol.

Question:

Can I upgrade my NStar software to WIN-PAK 2.0?
Not at this time. Future releases may allow upgrade capabilities.

Question:

Does Nstar software and hardware support the Northern AEP-3 or AEP-5 relay output boards?
Neither the NS2 panel nor the NStar software supports the AEP-3 or AEP-5 board.

Question:

What are the minimum PC requirements to run the NStar software?

•

Pentium II 400 MHz CPU

•

256 Megabytes of RAM (512 megabytes recommended)

•

20 Gigabyte hard drive

•

2 serial communication ports

•

Backup device (Tape Drive, DVD/CD burner, Network backup utility)

•

Microsoft Windows XP Pro; Windows 2000 Pro / Server (SP4)

Question:

Which video Capture Card can be used with the NStar software?
Honeywell Access Systems recommends the PB-VC-15 or higher capture card. Call Honey Access
Systems for more details.

Question:

What localized language support does the NStar software offer?
The initial release of NStar will be available only in English. Future plans are to release Spanish, Por-
tuguese and French localized versions.

Question:

What database engine does the Nstar software use?
Microsoft Data Engine (MSDE)

Question:

Does the NStar software or hardware support USB ports for communications?
Please contact Honeywell Access Systems for further details.

Question:

What is the maximum distance I can run the RS-232 connection?
The industry standard for RS-232 is limited to 50 feet.

Question:

Can the NS2 panel be mounted in a 19" rack to save on installation space?
Yes, the NS2 panel is designed to fit into a 19" rack mount enclosure.

Part No.

Kit Description

Contents

NSSKR

Starter kit with readers.

Software, panel, 2 readers, accessories.

NSSK

Starter kit.

Software, panel, accessories.

NSEKR

Expansion kit with readers.

Panel, 2 readers, accessories.

NSEK

Expansion kit.

Panel, accessories.

«
...
17
18
19
20
»

Содержание NS2





















Отзывы:

Нет отзывов

Похожие инструкции для NS2

Keywatt 50 Series

Бренд: IES Страницы: 20

Бренд: La Marche Страницы: 13

Бренд: ABL Страницы: 264

Бренд: Naztech Страницы: 18

Бренд: Analytic Systems Страницы: 12

Бренд: Toa Страницы: 8

Бренд: DieHard Страницы: 16

Бренд: WARRIOR Страницы: 15

Бренд: Quick Страницы: 48

Бренд: Volt-E Страницы: 28

Бренд: MOBILE+ Страницы: 2

Бренд: ABB Страницы: 132

Бренд: ABB Страницы: 132

Бренд: Overlander Страницы: 24

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 6

NEXTEC 320.30562

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды